It happens to everyone:circuit breaker trips. Learn how to avoid this common electrical problem. If you have ever plugged in your hairdryer, toaster oven or space heater only to be engulfed in darkness, you know what it’s like when your electrical breaker trips.
Sometimes having an electrical breaker trip is a minor inconvenience, readily repaired with the flick of a switch. However, frequent breaker trips are more than an inconvenience; they are the fail-safe that lets you know you have a bigger problem.
Let’s start with an average electrical panel. When a breaker – one of the switches you see on the panel – “trips,” you will often hear a popping noise as the switch pushes itself to an “off” position.
Why a Circuit Breaker Trips
Circuit breakers come in different amp ratings, so some systems can handle more than others. If you live in an older home or apartment that has few outlets, your system may have a lower amp rating, which will make breakers trip more easily.
Most important, when a breaker trips, it is keeping your electrical system from a literal meltdown, which can cause a fire.
- Tips to Avoid Breaker Trips
- Unplug electrical appliances that are not in use. Electrical current still runs to the appliance even if it is not turned on.
- Be especially aware of how many appliances you have plugged in during very cold or hot weather. Air conditioners and space heaters, for example, are energy suckers. In the winter, you will more likely have more lamps burning.
- If you have few outlets, try to spread your biggest energy users around.
- Also, if you have few outlets, putting an extension plug or power strip will tax your system more. It is still only one outlet.
- Make sure none of your appliance cords are damaged, frayed or melted.
Read more about avoiding circuit breaker trips at Networx.com
Well, all you millennials, Gen-Xers, and baby boomers, we are now firmly ensconced in the 21st century. The first decade and a half of the new millennium has seen a great deal of change, in fields ranging from politics and the economy to pop culture. One of the most striking new trends is the proliferation of electrical and electronic devices in the home. All these gizmos use a lot of power, making for plenty of reasons to update your electrical system to keep up with the times.
The Number 1 reason to upgrade your home electrical system is to safeguard yourself and your family. Unfortunately, there have been a number of tragic news reports lately about house fires which were caused by electrical malfunctions. Make sure that your system is up to current code (developed and regularly updated by the National Fire Protection Association) and that your electrical panel is adequate to meet your house’s requirements.
21st Century Electronics
Unless they were science fiction writers, your grandparents likely never dreamed of the day when almost every family in the US would have not one, but a multitude of personal computers. That’s not to mention such newfangled entertainment equipment as video game consoles, large screen plasma TVs, Blu-ray players, and home theater systems with surround sound. All of these devices are tons of fun but they do add an extra burden to your electrical panel.
Statement lighting is one of the most notable fashions in home decor of late. Attractive overhead and wall-mounted fixtures, as well as lamps for floor or table, create a thoroughly modern fashion statement. Beyond good looks, though, specialized task lighting is important for today’s popular hobbies, such as cooking, refinishing furniture, or crafting.
Whether it’s due to global warming or just an increased demand for comfort, air conditioning has become a standard feature in an astounding 87 percent of American homes. Even a tiny window unit needs a surprising amount of power (about 500 watts). And if you install central A/C, you’re looking at consumption of 3500 watts. in Winter, heating your home with electricity ups the figure as high as 26,500 watts. Make sure that your electrical system is ready for this load.
Read more at networx.com
Maintenance of your electric panel is necessary to ensure that your electric system is working smoothly and efficiently.
Maintaining the electrical system in a home is a crucial part of home ownership that may sound difficult and time consuming to many people. However, it is not as difficult as one may think. The electric panel is the heartbeat of a home’s entire system. They control every circuit that runs through the house, supply the power to each outlet, and are often responsible for running important components of the home, such as air conditioners and hot water heaters. Because of this, it is important to prevent damage to your system to ensure they work properly.
As a homeowner, there are preventative measures you can take that go a long way in assisting electricians that may come to work on your system. The first is to keep all doors and box covers closed at all times to prevent water damage, as many of us know that water and electricity do not mix well. Also, routinely wipe the outside of the door during household cleanings. This protects the system from dust. If dust enters the components of the electric panel, this can cause the system to overheat. If it becomes hot enough, it may cut off, leaving you without power until it cools down enough to be turned back on. Overheating may also damage other components, causing malfunctions in anything from a power outlet to a ceiling fan. Lastly, if there are instruction manuals, diagrams, or any other types of information on your system, do not throw it away. Tuck it away somewhere for safekeeping, as this information could be valuable and beneficial to any electricians who may be called to repair parts or perform maintenance on the system.
Also, pay attention to how electrical appliances, lights, the AC, or any other items that run off of electricity are functioning. This helps allow for early detection of any part of the electrical system that may be malfunctioning to be repaired. If a problem is not caught and handled accordingly, you may be left replacing the entire panel. If you believe that something is wrong with your system, do not hesitate to call an electrician to come check it. Time is of the essence when dealing with an electrical problem, and it must be addressed in order to keep you and your family comfortable and safe. Do not try to perform the maintenance or repairs yourself, as this could be highly dangerous and should only be done by a licensed and experienced professional. Many electricians offer timely and cost-efficient services, guaranteeing when they will show up (which is often the very next day), complete the necessary work, and, most importantly, your satisfaction. Also, their workmanship is usually covered under some type of warranty.
The daily operation of your electric panel does not need to be something you lose sleep over at night. There are many more things in your life for you to stress over. With the help of your electrician for maintenance and repairs and your preventative measures, you and your family will be able to enjoy all of the comforts that electricity has to offer.
Source: Free Articles from ArticlesFactory.com
Electrical shock is very serious. It can make your entire skeleton glow in a brilliant flash of light, after which you slump to the floor with your hair smoking. Or maybe that’s just in the cartoons. In the real world, a good zap is a lot less cool, although it is theoretically possible for your hair to smoke. So what’s the best way to prevent a life-threatening jolt? Calling an electrician, of course for any electrical repairs . If you don’t like that plan, at least do whatever you can to avoid the following no-nos, and understand that this is NOT a complete list.
6 Electrical Repairs Tips to avoid to do yourself
1. Mess with the service lugs in a breaker box
First of all, if you don’t know what service lugs are, you shouldn’t be doing anything in your breaker box (service panel) except resetting tripped breakers, if that. If you happen to know that the lugs are the big screw terminals or posts securing the service cables, you should also know that they’re always hot (energized), even after you shut off the main breakers. Obviously, you should stay well away from the cigar-size cables connected to the lugs, too. Definitely not a good smoke.
2. Work on the weatherhead
This is another one for the “don’t even think of it” category. The weatherhead, also called the service mast or periscope, is the metal pole or other structure that connects the electrical service lines leading from the utility power pole to your house. Since this is part of your house, you might be tempted to upright the pole if it’s leaning or tighten a bolt here and there. Can the thought of 200 amps coursing through your body convince you otherwise?
3. Do any wiring with the power on
If you’re a reader of builders’ magazines, you’ve certainly seen photos of someone doing something dangerous without the recommended protective gear, along with the caption: “Don’t do what this guy’s doing.” (And more often than not, the “guy” happens to be the author.) The point is, just because electricians sometimes work with hot wires doesn’t mean it’s safe for you to do it. It’s not safe for them, either.
For more information about Electrical Repairs Tips visit the http://www.networx.com
Our modern lifestyles now include many new technologically advanced products that challenge old electrical services. If you’re remodeling an older home, odds are your local building department will require you to upgrade electrical circuits service to 100 amps. Why? It’s to ensure that there’s enough power in the home for all the modern electrical needs without causing a fire. Older homes didn’t need to support so many appliances.
When upgrading your electrical service and rewiring for a remodeled kitchen, a new spa or other home improvement project, you should think beyond your immediate needs and anticipate other features that you or a future owner may want. Spending a little more now to upgrade your electrical wiring may save a lot of time and money in the long run.
Leave the dangerous work to the pros! Use this link to
Most standard home electrical circuits are on a 120-volt line. To run major appliances and heavy electrical equipment, you need 220-volt current in the house. And unless your clothes dryer runs on gas, it will require a 220-volt outlet to operate, so it’s necessary to upgrade to 220 to handle this kind of appliance.
Here are 10 Ways to Upgrade Electrical Circuits :
1. Appliances: With the wide variety of kitchen appliances such as food processors, blenders, coffee grinders, cappuccino makers and bread machines, there needs to be plenty of electrical outlets in a modern kitchen.
2. Cable/Satellite TV: Where might you want to watch TV? Consider adding cable to an upstairs bedroom or guest room or perhaps downstairs for a family recreation room.
3. Computers: Which rooms might someone want to plug in a computer and modem? A guest room could double as a home office. Consider adding additional electrical outlets or a phone or modem line.
4. Ceiling fans: Additional wiring will allow you to control the lights and fans separately from the wall switch, to adjust the fan speed and to turn off the light while leaving the fan on.
For more information about upgrade electrical circuits visit at http://www.homeadvisor.com/
Old wiring—even knob and tube wiring that dates back to the early 20th century—isn’t inherently dangerous, but unless you were around when the house was built, you can’t be sure the electrical system is up to code. Plus, materials such as wire insulation can deteriorate over time.
Safety issues with old wiring
Faulty wiring is the leading cause of residential fires, according to a 2009 study by the National Fire Prevention Association. And the older your house is, the greater the chances that old wiring might be outdated or unsafe.
If you don’t know the condition of your wiring, it’s worth paying a licensed electrician to inspect your electrical system. Expect to pay $150 to $300 for this service.
A good reason to consider replacing old wiring, aside from electrical home safety, is that some insurance carriers may refuse to insure houses with older electrical systems, or they may insist owners pay higher premiums.
Warning signs of outdated, old wiring
- Breakers trip or fuses blow regularly.
- A tingling sensation when you touch a wall switch, appliance, or receptacle.
- Dimming and flickering lights.
- A burning smell in a particular room or from an appliance.
- Discolored outlets and switch plates that are warm to the touch.
- Ungrounded outlets throughout the house (ungrounded outlets accommodate only two-prong plugs).
- A lack of ground fault circuit interrupter (GFCI) outlets in your bathrooms, your kitchen, and other areas that may be exposed to damp and wet conditions.
- Your house was built more than 40 years ago.
Read more: http://www.houselogic.com/home-advice/electrical/should-you-replace-old-wiring/#ixzz3o0HTmgkB
Follow us: @HouseLogic on Twitter | HouseLogic on Facebook
If you have a house with old wiring or other electrical issues, like a panel upgrade, flickering lights, faulty circuit breakers or any electrical repair or installation such as lights, ceiling fans or whole house surge protection call Rudolph Electric, your San Diego CA Electrician today.
Don’t Ignore Flickering Lights
Household lights that flicker and even dim periodically can be normal if not annoying, but they can also be dangerous, which is why flickering lights should never be ignored. In most cases, a slight flicker or brief dimming that becomes more pronounced over time indicates the presence of a poor connection somewhere in the system that needs to be addressed. Prior to calling an electrician, there are several factors to look at for flickering lights, such as when the lights flicker (and whether it’s associated with the start-up of a large appliance), how often the flickering occurs, and whether the flickering occurs throughout the house or only in one room or area. Here’s a look at the main causes of lights flickering in a house based on the type or pattern of flickering that’s occurring.
A situation where the same light or lights are flickering in one area and not throughout the home. The most obvious cause of this type of problem is a bad light bulb or a bad connection between the light bulb and the light fixture socket. However, if the problem is spread across multiple light fixtures but contained to a single area within the home, then it could be a circuit issue as well. An electrician can conduct a complete circuit diagnosis in this case to pinpoint the loose hot or neutral conductor that’s causing the issue, which may be located in a receptacle, a switch, a light, a j-box, or at the main electrical panel. Since loose connections can be dangerous, it’s important to identify and resolve the problem as soon as possible.
Lights in the home only flicker when a large appliance (such as the air conditioner) kicks on. This is actually a common problem, often associated with large outdoor A/C units that can draw up to 100+ amps when first turned on. Most homes have only a 200 amp main electrical service, so this draw can cause a brief flickering. In this case, the best thing to do to solve the problem is to contact an electrician to make sure that the outdoor unit is wired to the max ampacity, and that the wire size and fusing is correct, and all connections are tight. If everything looks good, then you might consider having a soft start kit installed on the outdoor unit to mitigate the amount of current required all at once to start the motor.
Read more at Enlightenme.com
If you have flickering lights in your home call a professional electrician like Rudolph Electric today to check out the problem. You could have a dangerous situation so don’t delay. Call 619-419-8813
Electrical demands developed by modern-day technology put more pressure on older electrical systems. Insurance coverage business have begun to deny renovations to a house equipped with a electrical service panel that may trigger electrical fires and they has not been upgraded by an electrician.
Many former electrical panels are now inadequate, creating safety hazards. The electrical service panel has a lifespan of between 20 to 25 years. In some scenarios panels weaken to the point where circuit breakers burn. Waiting too long to replace an old system threatens the electrical panel to turn off or perhaps triggering a fire.
Replacing or reconstructing your present electrical service panel will prevent numerous issues in the future. In a lot of scenarios, a complete replacement will cost less than regularly doing repair services. Property owners should consult their insurance coverage company to find out about the demands to minimize your premiums for electrical upgrades. It is likely that as soon as the upgrade is full, you can encourage them to offer you a modest discount rate on your premiums because the modernized wiring makes the premises more secure from fire and hence less of a danger to insure.
Electrical upgrades are regulated by the regional building regulations. Lots of electrical repairs and installations need to be examined and approved. Our certified electrical experts will assist with this process.
Leading Reasons for House Electrical Fires
1. Insufficient electrical capacity. Today’s homes have an increasing number of devices that consume electrical energy including clothing dryers, water heaters, electric varieties and ovens, frost-free refrigerators, dishwashers, even media centers. In warm environments, a/c is a major power drain. As you add home appliances to your house, the power supply might become inadequate. Anytime you put a significant appliance you need to have your electrical system examined by a certified professional. Don’t disregard indication like merges or breaker tripping or lights dimming!
Here are the main reasons for inadequate power in your house:
o Overloaded circuits
o Limited circuit box ability
o Insufficient number of outlets
Adding receptacles (and even worse, utilizing extension cords) does not increase the available power. If you find that you are plugging in numerous devices into one outlet, you need to increase the power supply straight from the distribution panel.
2. Obsolete devices or electrical systems. Thirty years back, domestic power use was much less, even in warm environments. The typical new house required 60-amp electrical service, which was linked to a screw-in fuse panel with 2 fuse blocks. 10 years later the average home required 100-amp electrical service and breaker had become standard equipment.
Upgrade Your Electrical Service Panel
Today, the typical brand-new house is equipped with 200-amp electrical service and a distribution panel dealing with approximately 40 fifteen-amp breaker. The kitchen area might be geared up with receptacles with the ability of providing more than 60 amps to the countertop home appliances alone. The air conditioning or HVAC system might take more power than a whole home did 30 years earlier.
If your home is even twenty years old, possibilities are it has to be upgraded! The thirty-year-old electrical service panel in your basement or garage the one with the screw-in merges is almost certainly a fire threat. Over time, the contacts weaken. The point of contact between the buss bar and the base of the fuse oxidizes or charcoals. As existing flows, enhanced heat is created, resulting in failure or fire. In California, if a home is equipped with an electrical distribution panel that uses screw-in merges, many insurance coverage business will not restore house owner insurance.
When you upgrade your home’s electrical systems, you’ll rest easy with the knowledge that you have actually greatly decreased the chance of a devastating fire.