Do you have enough outlets in your house? Many older houses only have one or two electrical outlets installation per room, which is not nearly sufficient to accommodate today’s high-tech house owner.
Using extension cords in houses is the top reason for household electrical fires. Building regulations been modified to include additional outlets but many houses still do not have the appropriate variety of receptacles required. We can set up electric outlets throughout your house; right where you require them the most. We can install extra outlets for flat screen TV’s, holiday lights, computers, microwave ovens, table lamps, and floor lamps, and so on.
Ungrounded outlets lack a ground wire to protect you from electric shock. A ground wire offers a safe pathway that is away from you back into the ground if there is a electrical short. Grounding likewise secures home appliances from electrical damage. This is why numerous home appliances have a three-pronged plug.
A two-pronged outlet signifies that there is no ground wire and prevents a property owner from plugging in home appliances or electronics that need grounding. In some cases, uninformed individuals will certainly change a two-prong outlet with a three-prong outlet without adding a brand-new ground wire. This produces a major hazard and is possibly harmful to anybody using that outlet. This is why replacing a two-prong outlet with a three-prong outlet without running a new wire is prohibited in most states.
Tamper Resistant Electrical Outlets Installation
Tamper Resistant electrical outlets are created to prevent injury or death to youngsters by avoiding the insertion of any gadget (pen, paper clip, etc.) into the outlet besides an electrical plug. The new outlet now has a special cover and resembles a regular outlet. These outlets have been utilized effectively in doctor’s offices, schools, and nurseries. Some states now require tamper resistant outlets in residential houses. Lots of electrical experts overlook this brand-new code and continue to install the less expensive, outdated outlets to save cash. We just install tamper resistant outlets. We will certainly never ever set up an inferior outlet in your home. Check your outlets for the “TR” label to make sure your house is as safe as it can be. Call us for new electrical plugs or electrical outlets installation.
A circuit breaker is a crucial part of every home’s electrical system and is an important safety component as well. Knowing when a circuit breaker needs to be replaced is one essential step for home safety, and this short guide will tell you how to identify problems with your circuit breaker so that you can know when to repair or replace it.
Circuit breaker panels, also called “breaker boxes,” are typically located in a house or apartment home’s basement or utility closet. Sometimes the panels are concealed by a small door that is painted the same color as the surrounding walls, in order to keep the breaker box concealed and out-of-the-way (unless there is a problem). The function of the circuit breaker is simple: it’s there to turn the electrical circuit off in case it becomes overloaded with electricity, most often due to a spike in the power supply. Without circuit breakers, kitchen and household appliances would be at major risk of overloading with electricity during a power surge, thus causing fires or other accidents. Circuit breakers “break” an electrical circuit during such an overload and keep you, your other appliances, and your home safe.
When an overload occurs and a circuit is broken, you will hear a brief click, followed by the power going out in one or more areas of your home (usually just one). When a breaker is working properly, if you open the panel and look at the rows of breakers for various areas of your home — all of which have “on” and “off” switches — you should easily be able to spot which breaker is in its “off” position, as the breaker for the affected area automatically switches to its off position during an overload. After an overload, you should switch the affected appliance(s) or light(s) to their “off” positions before checking the breaker box; you can then turn the switch in the breaker box to its “on” position to safely restore power.
Read more at networx.com
Who loves outdoor spaces as much as I do? Well … after a long, cold winter, the answer to that is probably just about everybody! Whether your home boasts a patio, a deck, a substantial outdoor room, or just the teeniest, tiniest urban balcony, there’s something so pleasurable about being able to relax in the fresh air, without trekking too far from the comforts of home. And speaking of comforts, we’ve got an easy way to make your exterior space even more comfortable. Add an electrical outlet or two. Here are a few suggestions for the best ways to use it. TIP: Make sure that you install only a GFCI outlet for your outdoor needs, as required by the electrical safety code.
Experiment with the type of outdoor electrical lighting that will ideally match your mood and enhance whatever excitement is going down at the moment. For example, a family cookout, followed by an evening of board games on the porch, will most likely call for illumination bright enough to determine whether it was, indeed, Miss Scarlet who offed Mr. Black in the study with the lead pipe. Or dazzle up a late night grownup party by hanging a few magical strings of twinkling fairy lights.
Cool and heat
Plug in either a weather-resistant outdoor fan or a gentle mist cooling system to provide a comfortable temperature in your outside area on the sultriest of dog days. In many states, summer days can often segue into surprisingly chilly evenings, so you may well find that an outdoor-rated heating system is a must even in July and August (and will extend the coziness zone to allow you to enjoy your deck or patio well into next fall).
If outdoor work is your pleasure, tend to your yard or your vegetable patch with ease. An outdoor outlet will provide a convenient place for you to juice up the ol’ garden tools. Trimmers, leaf blowers, saws, and the like will operate with a good deal more power than is available via battery, yet without the noise, mess, and general hassle that you get when you fuel up with gasoline. (Just think – no more winterizing your lawn mower or worrying about potential gas spills to contaminate your soil and pollute the air.)
Read more about outdoor spaces at networx.com
A power failure in your house or apartment is a major inconvenience — that’s one thing that every homeowner will agree on. However, the reason behind the outage is not so clear-cut. You may be left without electricity due to a number of different factors. Here’s how to troubleshoot an electrical Power outage, together with suggested solutions.
If the Power Outage Affects Your Neighbors Also
Investigate to see whether the outage is limited to just a part of your home. If you are working in the kitchen, for example, try clicking on a light switch in the living room. If the electricity is not functional anywhere in your house, look outside. See whether lights are visible at your neighbors’ or phone them to ask if they have power. In an apartment building, look to see whether the lights are on in the hallway. When the outage affects more than just your home, call your local utility company to report the problem and see if they can give you an estimate of how long it will take to repair. Turn off light switches and unplug electrical devices to protect them from power surge damage when the service is restored.
If the Problem is Limited to Your Home
When the problem is limited to your home — or only one part of your home — grab a flashlight if necessary and take a look at the GFCI receptacle, circuit breaker, main breaker, or fuse box to troubleshoot the electrical failure. On a GFCI outlet, try pushing the reset button. Otherwise, see whether a breaker has tripped or a fuse has blown.
When the Main Breaker Trips or Branch Breakers Can’t Be Reset
Turn off or unplug as many appliances and electronic devices as possible throughout your home. Go back to the circuit breaker and flip all the breakers off. Turn the main breaker switch on and off several times, finishing in the “on” position. Then reset each of the breakers, one at a time. If this causes the main breaker to trip or if you are unable to reset one of the branch breakers, you’ll know that you have a problem with that circuit, which will need electrical repair.
Read more about power outage troubleshooting at networx.com
Planning to remodel your room but still wondering how and where to start? You might want to start with upgrading your lighting fixtures. Especially if you have a small room that needs to look more spacious. A good lighting can make any room look and feel bigger. One excellent and versatile lighting fixtures that is popular among most homeowners today is the use of recessed lighting.
Also known as “can lights” or “downlights”, it can create a more spacious look to any room. Not only that it increases the amount of light in a room, but it can also create a more dramatic, sophisticated and accentuate any room in your home. If you are interested in switching to recessed lighting, you may ask your electrician today for a complete information about this lighting fixture.
What You Should Know About Recessed Lighting
There are two main components to recessed lighting: the housing and the trim. While picking the right trim is largely based on your personal taste, picking the right housing can be a little more technical (you might have to ask your electrician a few questions). Understanding the following is the key to getting the right recessed light:
Remodel or New Construction
In order to pick the correct housing, you will need to know whether to use a “Remodel” or “New Construction” style housing. Although these terms seem straightforward, they are somewhat of a misnomer. “New Construction” housings are appropriate when you have accessible space around where the light is going to be placed. “New Construction” housings are used when: A) You are building in a new space where you have full access to the wall/ceiling/floor without sheet rock or plaster hindering your access to beams, etc., or B) You have access to the space due to an overhead attic, a pop out ceiling panel, etc. The reason you need all this space? “New Construction” housings are bulkier and are installed in between joist beams or onto hanger bars from T-Bar or drop ceilings. Conversely, “Remodel” housings are less bulky and appropriate when you have limited or no access to the space above the new fixture.
Read full article on ylighting.com
Maintenance of your electric panel is necessary to ensure that your electric system is working smoothly and efficiently.
Maintaining the electrical system in a home is a crucial part of home ownership that may sound difficult and time consuming to many people. However, it is not as difficult as one may think. The electric panel is the heartbeat of a home’s entire system. They control every circuit that runs through the house, supply the power to each outlet, and are often responsible for running important components of the home, such as air conditioners and hot water heaters. Because of this, it is important to prevent damage to your system to ensure they work properly.
As a homeowner, there are preventative measures you can take that go a long way in assisting electricians that may come to work on your system. The first is to keep all doors and box covers closed at all times to prevent water damage, as many of us know that water and electricity do not mix well. Also, routinely wipe the outside of the door during household cleanings. This protects the system from dust. If dust enters the components of the electric panel, this can cause the system to overheat. If it becomes hot enough, it may cut off, leaving you without power until it cools down enough to be turned back on. Overheating may also damage other components, causing malfunctions in anything from a power outlet to a ceiling fan. Lastly, if there are instruction manuals, diagrams, or any other types of information on your system, do not throw it away. Tuck it away somewhere for safekeeping, as this information could be valuable and beneficial to any electricians who may be called to repair parts or perform maintenance on the system.
Also, pay attention to how electrical appliances, lights, the AC, or any other items that run off of electricity are functioning. This helps allow for early detection of any part of the electrical system that may be malfunctioning to be repaired. If a problem is not caught and handled accordingly, you may be left replacing the entire panel. If you believe that something is wrong with your system, do not hesitate to call an electrician to come check it. Time is of the essence when dealing with an electrical problem, and it must be addressed in order to keep you and your family comfortable and safe. Do not try to perform the maintenance or repairs yourself, as this could be highly dangerous and should only be done by a licensed and experienced professional. Many electricians offer timely and cost-efficient services, guaranteeing when they will show up (which is often the very next day), complete the necessary work, and, most importantly, your satisfaction. Also, their workmanship is usually covered under some type of warranty.
The daily operation of your electric panel does not need to be something you lose sleep over at night. There are many more things in your life for you to stress over. With the help of your electrician for maintenance and repairs and your preventative measures, you and your family will be able to enjoy all of the comforts that electricity has to offer.
Source: Free Articles from ArticlesFactory.com
Electrical shock is very serious. It can make your entire skeleton glow in a brilliant flash of light, after which you slump to the floor with your hair smoking. Or maybe that’s just in the cartoons. In the real world, a good zap is a lot less cool, although it is theoretically possible for your hair to smoke. So what’s the best way to prevent a life-threatening jolt? Calling an electrician, of course for any electrical repairs . If you don’t like that plan, at least do whatever you can to avoid the following no-nos, and understand that this is NOT a complete list.
6 Electrical Repairs Tips to avoid to do yourself
1. Mess with the service lugs in a breaker box
First of all, if you don’t know what service lugs are, you shouldn’t be doing anything in your breaker box (service panel) except resetting tripped breakers, if that. If you happen to know that the lugs are the big screw terminals or posts securing the service cables, you should also know that they’re always hot (energized), even after you shut off the main breakers. Obviously, you should stay well away from the cigar-size cables connected to the lugs, too. Definitely not a good smoke.
2. Work on the weatherhead
This is another one for the “don’t even think of it” category. The weatherhead, also called the service mast or periscope, is the metal pole or other structure that connects the electrical service lines leading from the utility power pole to your house. Since this is part of your house, you might be tempted to upright the pole if it’s leaning or tighten a bolt here and there. Can the thought of 200 amps coursing through your body convince you otherwise?
3. Do any wiring with the power on
If you’re a reader of builders’ magazines, you’ve certainly seen photos of someone doing something dangerous without the recommended protective gear, along with the caption: “Don’t do what this guy’s doing.” (And more often than not, the “guy” happens to be the author.) The point is, just because electricians sometimes work with hot wires doesn’t mean it’s safe for you to do it. It’s not safe for them, either.
For more information about Electrical Repairs Tips visit the http://www.networx.com
Our modern lifestyles now include many new technologically advanced products that challenge old electrical services. If you’re remodeling an older home, odds are your local building department will require you to upgrade electrical circuits service to 100 amps. Why? It’s to ensure that there’s enough power in the home for all the modern electrical needs without causing a fire. Older homes didn’t need to support so many appliances.
When upgrading your electrical service and rewiring for a remodeled kitchen, a new spa or other home improvement project, you should think beyond your immediate needs and anticipate other features that you or a future owner may want. Spending a little more now to upgrade your electrical wiring may save a lot of time and money in the long run.
Leave the dangerous work to the pros! Use this link to
Most standard home electrical circuits are on a 120-volt line. To run major appliances and heavy electrical equipment, you need 220-volt current in the house. And unless your clothes dryer runs on gas, it will require a 220-volt outlet to operate, so it’s necessary to upgrade to 220 to handle this kind of appliance.
Here are 10 Ways to Upgrade Electrical Circuits :
1. Appliances: With the wide variety of kitchen appliances such as food processors, blenders, coffee grinders, cappuccino makers and bread machines, there needs to be plenty of electrical outlets in a modern kitchen.
2. Cable/Satellite TV: Where might you want to watch TV? Consider adding cable to an upstairs bedroom or guest room or perhaps downstairs for a family recreation room.
3. Computers: Which rooms might someone want to plug in a computer and modem? A guest room could double as a home office. Consider adding additional electrical outlets or a phone or modem line.
4. Ceiling fans: Additional wiring will allow you to control the lights and fans separately from the wall switch, to adjust the fan speed and to turn off the light while leaving the fan on.
For more information about upgrade electrical circuits visit at http://www.homeadvisor.com/
A ground fault circuit interrupter (GFCI) can help avoid electrocution. If an individual’s body begins to get a shock, the GFCI senses this and cuts off the power before he/she can get injured.
GFCIs are usually installed where electrical circuits might accidentally come into contact with water. They are frequently found in kitchens, bath and laundry rooms, and even out-of-doors or in the garage where electrical power tools might be utilized.
Exactly what is a ground fault?
According to the National Electrical Code, a “ground fault” is a conducting connection (whether intentional or unexpected) in between any electric conductor and any carrying out product that is grounded or that may end up being grounded. Electricity always wants to find a course to the ground. In a ground fault, electricity has found a path to ground, however it is a course the electricity was never planned to be on, such as through a person’s body.
Because of this capacity for shock, GFCI protection is used to secure human life.
How do Ground Fault Circuit Interrupters work?
The ground fault circuit interrupters will “sense” the difference in the amount of electricity flowing into the circuit to that flowing out, even in amounts of current as small as 4 or 5 milliamps. The GFCI reacts quickly (less than one-tenth of a second) to trip or turned off the circuit.
Exactly what are the kinds of GFCIs?
There are 3 types of GFCIs. The most typically utilized “receptacle-type” GFCI, just like a typical wall outlet, is the type with which most customers recognize. Additionally, breaker GFCIs are often utilized as replacements for basic circuit breakers and provide GFCI security to all receptacles on that individual circuit. Temporary or portable GFCIs are frequently utilized in building and in outdoor settings with electrical tools, lawn mowers, trimmers, and comparable gadgets. They ought to not be utilized as a permanent option to a routine GFCI. Short-lived ground fault circuit interrupters ought to be checked prior to every usage.
How should GFCIs be checked?
Many consumers don’t inspect their GFCIs to verify they are working. GFCIs are electronic devices that can be damaged or wear out. The electrical receptacle in a GFCI might continue to work, even if the GFCI circuit no longer works. If this is the case, have a certified electrician change it as quickly as possible.
Ground fault circuit interrupters ought to be checked regular monthly to ensure they are in working condition. Whether you have a receptacle or breaker GFCI, pressing the TEST button should turn off the power to the circuit. For the receptacle-type GFCI, pushing the TEST button ought to trigger the RESET button to turn on. (Remember to push the RESET button to re-establish power and protection.) For the circuit breaker-type GFCI, pushing the TEST button ought to cause it to relocate to the tripped position. (Remember to reset it to re-establish power and protection.).
When should you check GFCIs?
GFCIs must be inspected month-to-month to figure out if they are running appropriately. A portable GFCI needs to be utilized out-of-doors with various electrical power tools (i.e., drills, lawn mowers, trimmers) and ought to be tested prior to each usage!
Where should GFCIs be used?
It is suggested that GFCIs be installed in areas where appliances and power tools are utilized in close proximity to water. Faucet water or wet things have the ability to carry electricity extremely easily and can link your body to a ground potential, hence increasing your opportunities of getting a shock from a ground fault. Appliances that have integrated GFCI defense, as now needed for hair dryers, may not require additional GFCI defense, however there are still many appliances not equipped with GFCI security.
What is nuisance tripping of a GFCI?
It takes just 5 mA (0.005 A) of present leak from the hot wire to the ground to trigger a GFCI to travel. A percentage of leak current may be difficult to avoid in some regular circuits. Hand-held power tools do not cause a tripping problem if the tool is kept in good condition. Some stationary motors, such as a bathroom vent fan or fluorescent lighting fixtures, might produce enough leak to trigger problem tripping. Another problem might be a long circuit with many splices. If possible, keep GFCI circuits less than 100 feet long. To avoid problem tripping, a GFCI must not provide:.
- Circuits longer than 100 feet.
- Fluorescent or other types of electric-discharge lighting components.
- Completely set up electric motors.
Old wiring—even knob and tube wiring that dates back to the early 20th century—isn’t inherently dangerous, but unless you were around when the house was built, you can’t be sure the electrical system is up to code. Plus, materials such as wire insulation can deteriorate over time.
Safety issues with old wiring
Faulty wiring is the leading cause of residential fires, according to a 2009 study by the National Fire Prevention Association. And the older your house is, the greater the chances that old wiring might be outdated or unsafe.
If you don’t know the condition of your wiring, it’s worth paying a licensed electrician to inspect your electrical system. Expect to pay $150 to $300 for this service.
A good reason to consider replacing old wiring, aside from electrical home safety, is that some insurance carriers may refuse to insure houses with older electrical systems, or they may insist owners pay higher premiums.
Warning signs of outdated, old wiring
- Breakers trip or fuses blow regularly.
- A tingling sensation when you touch a wall switch, appliance, or receptacle.
- Dimming and flickering lights.
- A burning smell in a particular room or from an appliance.
- Discolored outlets and switch plates that are warm to the touch.
- Ungrounded outlets throughout the house (ungrounded outlets accommodate only two-prong plugs).
- A lack of ground fault circuit interrupter (GFCI) outlets in your bathrooms, your kitchen, and other areas that may be exposed to damp and wet conditions.
- Your house was built more than 40 years ago.
Read more: http://www.houselogic.com/home-advice/electrical/should-you-replace-old-wiring/#ixzz3o0HTmgkB
Follow us: @HouseLogic on Twitter | HouseLogic on Facebook
If you have a house with old wiring or other electrical issues, like a panel upgrade, flickering lights, faulty circuit breakers or any electrical repair or installation such as lights, ceiling fans or whole house surge protection call Rudolph Electric, your San Diego CA Electrician today.