Planning to remodel your room but still wondering how and where to start? You might want to start with upgrading your lighting fixtures. Especially if you have a small room that needs to look more spacious. A good lighting can make any room look and feel bigger. One excellent and versatile lighting fixtures that is popular among most homeowners today is the use of recessed lighting.
Also known as “can lights” or “downlights”, it can create a more spacious look to any room. Not only that it increases the amount of light in a room, but it can also create a more dramatic, sophisticated and accentuate any room in your home. If you are interested in switching to recessed lighting, you may ask your electrician today for a complete information about this lighting fixture.
What You Should Know About Recessed Lighting
There are two main components to recessed lighting: the housing and the trim. While picking the right trim is largely based on your personal taste, picking the right housing can be a little more technical (you might have to ask your electrician a few questions). Understanding the following is the key to getting the right recessed light:
Remodel or New Construction
In order to pick the correct housing, you will need to know whether to use a “Remodel” or “New Construction” style housing. Although these terms seem straightforward, they are somewhat of a misnomer. “New Construction” housings are appropriate when you have accessible space around where the light is going to be placed. “New Construction” housings are used when: A) You are building in a new space where you have full access to the wall/ceiling/floor without sheet rock or plaster hindering your access to beams, etc., or B) You have access to the space due to an overhead attic, a pop out ceiling panel, etc. The reason you need all this space? “New Construction” housings are bulkier and are installed in between joist beams or onto hanger bars from T-Bar or drop ceilings. Conversely, “Remodel” housings are less bulky and appropriate when you have limited or no access to the space above the new fixture.
Read full article on ylighting.com
Our modern lifestyles now include many new technologically advanced products that challenge old electrical services. If you’re remodeling an older home, odds are your local building department will require you to upgrade electrical circuits service to 100 amps. Why? It’s to ensure that there’s enough power in the home for all the modern electrical needs without causing a fire. Older homes didn’t need to support so many appliances.
When upgrading your electrical service and rewiring for a remodeled kitchen, a new spa or other home improvement project, you should think beyond your immediate needs and anticipate other features that you or a future owner may want. Spending a little more now to upgrade your electrical wiring may save a lot of time and money in the long run.
Leave the dangerous work to the pros! Use this link to
Most standard home electrical circuits are on a 120-volt line. To run major appliances and heavy electrical equipment, you need 220-volt current in the house. And unless your clothes dryer runs on gas, it will require a 220-volt outlet to operate, so it’s necessary to upgrade to 220 to handle this kind of appliance.
Here are 10 Ways to Upgrade Electrical Circuits :
1. Appliances: With the wide variety of kitchen appliances such as food processors, blenders, coffee grinders, cappuccino makers and bread machines, there needs to be plenty of electrical outlets in a modern kitchen.
2. Cable/Satellite TV: Where might you want to watch TV? Consider adding cable to an upstairs bedroom or guest room or perhaps downstairs for a family recreation room.
3. Computers: Which rooms might someone want to plug in a computer and modem? A guest room could double as a home office. Consider adding additional electrical outlets or a phone or modem line.
4. Ceiling fans: Additional wiring will allow you to control the lights and fans separately from the wall switch, to adjust the fan speed and to turn off the light while leaving the fan on.
For more information about upgrade electrical circuits visit at http://www.homeadvisor.com/